Dehumidifiers

Moisture is added to the air throughout the day from cooking, cleaning, bathing, perspiring and even breathing. Designed for everyday use, the hands-free and tankless IW25-5 dehumidifier removes 31.5 litres* of moisture per day to reduce relative humidity in spaces up to 140m2.

Mould is a fungus that has a preference for damp environments (relative humidity of 60%+). Mould associated with damp buildings can trigger respiratory illnesses and worsen asthma and allergic conditions, If the relative humidity can be reduced, that can help prevent visible mould growth from occurring.

As building codes become tighter to provide efficient housing, airflow is minimised and moisture has no way to escape, leading to poor IAQ. Trapped moisture can cause condensation challenges including musty odours, mould growth, structural damage, health issues, potential litigation and more. The IDS Dehumidifier works independently of HVAC systems, keeping indoor relative humidity levels consistent to help prevent mould.

Assists in mitigating pollution and pathogens by generating a balance of positive and negative ions. These ions disperse across the room, binding with pollutants such as bacteria, pollen, mould, odours, and various other contaminants, effectively breaking them down and converting them into water vapour.

The tankless IDS IW25 Dehumidifier, featuring ozone-free ionisation, now comes with hands-free draining, eliminating the hassle of dealing with reservoir tanks. This system allows for direct drainage into a hub drain or other plumbing via either a gravity drainage system or an integrated condensate pump.

The built-in humidistat is discreetly located behind the tamper-proof front panel, enabling you to set it and forget about it. With the IDS IW25 Dehumidifier, facilities personnel can effortlessly access maintenance or make unit adjustments using the provided front cover tool, which involves removing two security screws. This feature prevents unauthorised access to the unit controls while maintaining public safety.

Unlike the majority of portable dehumidifiers on the market, the IDS IW25 wall dehumidifier requires minimal space in homes due to its ability to be fully or partially recessed into the wall.

With the slim design the IXL IDS Dehumidifier can effectively remove up to 31.5 litres of water for areas spanning up to 140 square metres.

Enjoy reliable performance backed by a comprehensive 5-year warranty, including parts and labour.

The IW25 Dehumidifier is designed to be easily installed in existing or new construction properties. The chassis fits between studs 406mm in the centre and screws directly into the studs. Considerable effort was given to ensure the dehumidifier fits underneath the air return grill in new construction situations. A properly trained electrician would need to perform the necessary hardwiring (unless it is being plugged into a wall outlet). Still, an on site maintenance personnel should be able to handle the remainder of the installation.

The IW25 Dehumidifier by Innovative Dehumidifier Systems is rated for an average power consumption of 370W (in a 27 degree Celsius, 60%RH environment). It should be noted that the higher the ambient humidity is inside the dwelling, and the size of the dwelling, will cause the IW25 Dehumidifier to run more often, thus requiring more energy. With that in mind, if the environment required the dehumidifier to operate at a 30% utilization rate (or 8 hours per day) and the cost of electricity is between 19c and 25c per KW it would cost roughly between 57 cents and 75 cents per day to operate.

A dehumidifier removes moisture by drawing air into the unit across a set of cold coils where is condensed into water and allowed to drain. This dried air then passes over hot coils which make it slightly warmer. If you have a properly sized air conditioner, you shouldn’t need a dehumidifier to lower humidity, unless the air is too humid at times when it’s too cold to run the AC. The problem today is that properly sized HVAC systems are not available for many common residential situations, creating a need for dehumidification to augment the existing HVAC system. The IW25-5 dehumidifier provides the ideal solution to combating residential mould growth.

Humidity in homes occurs by moist surfaces drying and that moisture evaporating into the air. Many items are constantly creating moisture and eventually evaporating into the air inside our homes and properties. A family of 4 produces approximately 12 litres of moisture per day during normal activities. Excessive moisture and humidity in a residential space can also result from any of the following if not properly controlled: Leaks, showering, hanging clothes to dry, boiling water for cooking, humid outside air, atmospheric conditions, breathing, improperly ventilated crawl space, not running the air conditioning during summer. Our self-contained, IW25-5 dehumidifier is a reliable and proven way to manage humidity and excessive moisture in homes.

Dehumidification is the mechanical removal of humidity from the air using an in/on wall dehumidifier or some other acceptable method. HVAC systems in the cooling mode accomplish this to a certain extent, however if not properly sized, an HVAC system does not run long enough to properly dehumidify a space.

Mould is a fungus that has a preference for warm temperatures, dark environments, organic food sources (most construction materials & occupant personal belongings suffice), stagnant air, and damp environments (relative humidity of 60% +). If you can remove or eliminate any one of these items you can help prevent visible mould growth from occurring. In most scenarios, many of these items exist, and reducing their presence is beyond the control of a property owner. The IW25-5 in-wall / on-wall dehumidifier allows property owners to set a specific relative humidity range for a space (up to 140 square metres) regardless of the occupant HVAC and lifestyle, thus being a great tool to remove moisture and keep indoor relative humidity below 60%.